You must have noticed the Foxconn G33M02 OEM motherboard on several Dell laptops and computers. Foxconn is one of the largest suppliers of all sorts of electronic components. They use the microATX form factor along with this motherboard on some Dell desktop computers. However, every electronic component comes along with its own set of specifications. In today’s post, we will focus on the G33M02 mac ram. Here, I have listed down some important features of this motherboard for you. So, without wasting much time let us see Foxconn G33M02 manual in detail.
Foxconn G33M02 Specs
In this section, I will discuss the Dell G33M02 Motherboard manual in more detail.
For your information, the G33M02 motherboard supports Intel 45 nanometer processors. Below I have listed down few processors that support this motherboard.
- Intel Celeron
- Pentium 4 Processor
- Pentium D Processor
- Pentium Dual-Core Processor
- Core 2 Duo Processor
- Core 2 Quad Processor
The FBS speed of all the above-listed processors is 800MHz, 1066MHz, and 1333MHz.
Below I have listed down the chipset of this motherboard.
- North Bridge – Intel G33
- SouthBridge – ICH9
The LGA 775 socket present on this motherboard can fit in with Intel Celeron, Pentium Dual-Core, and Core 2 Dual-Core processors. However, the socket house of the central processing unit of the G33M02 graphics card is called Socket T.
This motherboard comes along with four 240-pin DIMM slots for ram support. The manufacturers have used DDR2 SDRAM technology for this motherboard. And operates at the speed of 667 or 800 MHz.
Each slot of G33M02 ram support can fit up to 1GB RAM. And allows users to install up to 4GB maximum. The G33M02 also has four Serial ATA connectors for installing mass storage devices like hard drivers and optical disk drivers. You must be surprised to know that each connector has a native transfer rate of 3 gigabits per second.
The G33M02 motherboard has four Peripheral Component Interconnect expansion slots. This will help you to attach hardware such as network cards, TV tuners, and modems. There, 2 expansion slots are Conventional PCI slots and the other two are advanced PCI Express Slots. While one of the PCI Express Slots has single land for receiving and transmitting data. The other 3 slots have 16 lanes for receiving and transmitting data.
This G33M02 system board can support the following drivers.
- 1 ATA 133 Device
- 4 SATAII Device with RAID 0, RAID 1, RAID 5, or RAID 10.
However, the SATAII connections have Intel Matrix storage and Intel Rapid Recovery technology simultaneously.
The audio controller for this system board is Realtek® ALC888 and features 7.1 channel audio.
The Intel GMA 3100 of this memory card provides the computer’s graphics and video. It shares up to 256 MB of memory and can support a resolution of 2,048 by 1,536 pixels.
This model has the LAN connection of GBE LAN with Realtek® RTL8110SC.
Here, I have mentioned the BIOS features of this motherboard.
- Eight-megabit flash EEPROM with LAN boot plug and play.
- Advanced Configuration and Power Interface
- Wired for Management
- Desktop Management Interface.
You can keep on reading to know some other features of this motherboard.
The form factor of this model is Micro ATX. And the dimensions of this board are 9.6 inches by 9.6 inches.
Ports And Interfaces
This system board features a number of ports and interfaces. Some of them are listed as the port and interfaces below for you.
- Two IEE 1394 ports
- Six Audio jacks
- One parallel port
- One PS/2 mouse port
- One PS/2 keyboard port
- One VGA monitor port
- One serial port
- Six USB 2.0 ports
- One RJ-45 LAN port
- One ATX 24-Pin power connector
- One 4-Pin ATX 12V power connector
- CPU/system FAN connectors
- One CD connector
- One infrared port
- One front panel connection
- One S/PDIF out header
- Four SATAII connectors
- One Intruder
- One COM port
- One IDE connector for an ATA 133 device.
Read Also: How To Make A Tycoon On Roblox?
What Memory Size Can I Put On My Foxconn G33M02 Motherboard?
You can put up to 4 GB of memory in your G33M02 motherboard.
What CPU Can Be Put In A Foxconn G33M02?
This G33M02 motherboard can accommodate Intel Celeron, Pentium Dual-Core, and Core 2 Dual-Core processor. And has a Land Grid Array 775 socket.
Where Is the BIOS Location?
BIOS is located on the motherboard and the CMOS battery power this chip.
Read Also: What Does Renewed Mean On Amazon?
In my above-written post, we have studied the Foxconn G33M02 Drivers in detail. The Intel G33 chip is directly connected to the CUP and functions as a northbridge. While the Intel ICH9 chip looks after the motherboard’s slower capabilities and functions as the southbridge. You will find four Peripheral Component Interconnect expansion slots in this system board. Two of them are Conventional PCI slots and the other two are advanced PCI Express Slots. Above I have also listed down BIOS, ports, and interference of this motherboard. In short, I have covered all the specifications of Foxconn G33M02 in my above article.